How to use a Wi-Fi secured Canon mg2922 setup to connect a Windows machine to a wireless network. Before you begin, make sure your printer is turned on and connected. There will be a light-up button in front of it. Press and hold the Wi-Fi button while the printer is turned on until the amber alert light flashes.
When the Wi-Fi button starts to flash, let go of it. Then, make sure the power and Wi-Fi lights are both on and rapidly flashing. Press and hold the WPS button on your wireless network or access point while the Wi-Fi light is blinking. Depending on your router, you might see a button similar to this one. You have two minutes to complete this step starting when the Wi-Fi light starts to flash. The printer and wireless router are linked after the Wi-Fi light stops flickering and stabilises.
How to setup and install a wireless Canon Mg2922
Insert the CD ROM that came with Canon Pixma mg2922 Troubleshooting after turning on your computer to set up your printer and install drivers. Visit the Canon website to download the installation files. To download the printer's software and set up WiFi on the Canon Mg 2922, click on these links.
Open the downloaded file on your computer and follow the prompts on the welcome screen to get started. Click Next to pick access point connection after selecting wireless land connection as your connection type. The programme will check to see if your printer is already on and connected to the network when you click Next. The list ought to be empty if this is your first time installing the printer. The checkbox where you could choose the printer from the list was absent. If the printer is already listed, click Next. After choosing Next on the next two windows, the wireless printer installation will start. You can see this or this on your screen after pressing the WPS button. To locate your printer on the network, click Next. When you see the window stating that the connection was successful, choose your printer and click Next. From the list that appears, select a piece of software to view the License Agreement screen. To proceed with the installation, select yes. By selecting Next at this point, the software installation will be finished.
How to setup a wireless network on a Canon Mg2922 Printer
The technical manual for the Canon Mg2922 may take some time to WiFi-enable. When the dialogue box indicating that the Canon mg2922 configuration is complete appears, click Next. The screen for printhead alignment occurs after selecting complete. Select the screen's execute button. Start the alignment of the printhead. Any directions displayed on the screen have to be followed. After the printhead alignment is complete, click Next to shut off the programme.
create a printer You will be asked to register your product at this point. After registration is finished, a new window will open if you want to register right away. Installing the expanded survey application is now required. If you choose not to, the extended survey programme won't be installed right away. Open the test print window by inserting some plain paper in the printer, then choose "Agree" to print a test page. After printing a test page, click execute. By selecting next, you can also skip the test printing. In order to finish the installation, click Exit when you see this screen. The Canon Pixma mg 2922 can now be completely configured to a wireless network and used to print or scan when WPS has been enabled on a Windows machine.
References: Canon Pixma mg2922 Setup
